Monitor Audio – IWA-250 In-Wall Amplifier

Description

Delivering up to 250 watts into 4 ohms, a single IWA-250 will power single or dual IWS-10’s to provide higher power levels for larger rooms or to meet customer demands.

Features

• Rigid, high quality steel case
• Switch mode power supply
• Class D power amplifier delivering up to 250 watts into 4 ohms (dual IWS-10 drivers)
• High efficiency design resulting in cool running – low thermal output
• DSP controlled with advanced limiters
• <0.5watt standby power consumption (ErP certified)
• DC short circuit protection, over-current and thermal protection

Technical Specs

• System Format: Active sub-woofer amplifier
• Lower Frequency Limit: 25 Hz
• Upper Frequency Limit: Variable 40 – 120 Hz @ 24 dB/Octave
• Amplifier Output: 250 W @ < 1% THD+N
• Drive Unit Complement: 4 – 8 ohms
• Amplifier Classification: Class D amplifier with Switch mode power supply (SMPSU)
• Cabinet Support: For use when using the dedicated back box
• EQ: Music/ Movie/ Impact
• Phase Control: 0 & 180 degrees
• Auto Sensing: Line Level > 3.5mV
• Input Level Requirements: Standby after approximately 15 minutes if no signal sensed
• Input Impedance: > 20K ohms
• Mains Input Voltage: AC 110 – 120 V ~ 50/60Hz AC 220 – 240 V ~ 50/60Hz (Factory Region Preset)
• Dimensions (H x W x D): 43.7 x 432 x 263 mm (1^3/4 x 17 x 10^3/8)
• Connection: LFE in (Stereo RCA and Balanced), 12v Trigger in (3.5 mm mono mini-jack), left and right speaker output
• Trigger Input: 5 – 12v via 3.5 mm mono mini-jack socket
• Power Consumption: Standby: < 0.5 W (ErP approved) Typical Idle: < 10 W Max Rated: 200 W

Manuals & Datasheets

• Monitor Audio IWA-250 Amplifier Owners Manual