Fibaro Door / Window Sensor (Z-Wave)
Monitors doors, windows and more. Match it to an alarm to deter intruders or log access to a restricted room.
£38.88 – £42.12 inc VAT
EAN / Barcode: 5902701700348 | 5902701700355 | 5902701700362 | 5902701700379 | 5902701700386 | 5902701700393 | 5902701700409
Our technical team is on hand to solve any problems or help you find the ideal solution.
The FIBARO Door / Window Sensor is compact and simplistic, thanks to a selection of 7 different colours it can adapt to its surroundings with ease. No unsightly cables to run along door frames or window cubbies, the proximity sensor is battery powered and optimised for extended periods of use. The sensor monitors doors and windows or any hinged portal you can think to deploy it, match it to an alarm to deter intruders or log access to a restricted room. Impress visitors by activating scenes as you open the door, raise the lights and open the blinds while a subtle symphony swell fills the room.
Simple, compact peace of mind
The FIBARO Door / Window Sensor is easy to install and even easier to use, if it’s an entrance point, you can monitor it. The sensor is not only for perimeter security, do you need to monitor your safe jewellery draw or medicine cabinet? Thats no problem, the sensor is compact enough for almost any challenge.
No window left behind
Activate your ‘leaving for work’ scene and the FIBARO Door / Window Sensor will notify you of windows and doors left open.
The garage door will notify you when its been left open, if its motorised and if fitted with the Smart Implant, it can close itself.
Home safe home
Once the sensors are armed, they will notify you if anyone uninvited tries to enter your property or tampers with the sensor.
Home sweet home
Simply deactivate the alarm scene, and upon entering the sensor will launch the ‘welcome home’ scene you’ve setup.
Under lock and key
Keep your valuables, medicines or sensitive information safely guarded from prying eyes and sticky fingers.
Kids will be kids
Keep the little ones safe from harm, if you’ve left a gate open or if a child gets rough with the gate, the sensor will notify you.
Get notifications of your pet’s comings and goings, is the cat already in? Looks like you’ve got a furry intruder.
Home smart home
Further improve your carbon footprint by utilising the built in heat sensor to monitor and control temperature near open windows.
- Compatible with any Z-Wave or Z-Wave+ Controller,
- Supports protected mode (Z-Wave network Security Mode) with AES-128 encryption,
- Works with other Z-Wave network devices, but as a battery device doesn’t take part in signal routing,
- Door/window opening detected through separation of Sensor’s body and a magnet,
- Built-in temperature sensor,
- Detects tampering, when detached or opened,
- Easily mounted on doors, windows, garage doors, gates and roller blinds,
- Battery powered,
- Visual LED indicator signalling status of the device,
- 7 color variations:
- White – FGDW-002-1
- Grey – FGDW-002-2
- Black – FGDW-002-3
- Beige – FGDW-002-4
- Light Brown – FGDW-002-5
- Medium Brown – FGDW-002-6
- Dark Brown – FGDW-002-7
- Dimensions: 71 x 18 x 18mm
- Battery Type: ER14250 1/2 AA
- Power Supply: 3.6V DC Battery
- Frequency: 2.4 GHz
- Range: up to 50m (free range)
Frequently Asked Questions
What is a FIBARO Door/Window Sensor?
Should I close the cover of the device while adding it to my network?
Yes – The plastic cover should remain closed at all times.
Why does the device have two TMP buttons?
Does the device have controlled outputs?
No – There is no output module.
Can I use both magnetic and IN input?
This can’t happen at the same time. Whilst utilising IN input, do not use magnetic input.
How many DS18B20 temperature sensors can I connect to Door/Window Sensor?
You can only connect one DS18B20 temperature sensor to the door/Window Sensor.
I would like to connect other 1-wire devices than DS18B20. Can I do it?
No – Only the DS18B20 is supported by the the Fibaro Door/Window Sensor.
Can the Door/Window Sensor repeat other Z-Wave devices' signals?
No – the Door/Window Sensor is a battery device therefore can’t act as a repeater. But it can send the signal repeated by up to 4 other nodes.
Does resetting the module memory also remove it from the controllers' memory?
No – if you reset the module procedure it will only remove only the controller’s ID from the module but it won’t delete the module from the controller.
I want to remove the module completely. What should I do?
Power on the controller into deleting mode then do the same as during the adding procedure. Push the TMP button 3 times, ensure the plastic cover is closed.
How long does this device work on one battery?
Up to 2 years in default settings however this is dependent on the usage.
Is the Fibaro Door/Window Sensor waterproof? Can it be used outside?
No – It is recommended to only use the sensors indoors.
Physical and Performance Attributes
|Dimensions (L x W x H)||71 × 18 × 18 mm|
|Power Supply||3.6V DC Battery|
|Battery Type||ER14250 (1/2 AA 3.6v)|
|Number of Batteries||1|