Fibaro Roller Shutter 2 (Z-Wave)
Z-Wave remote controller for awnings, blinds, venetian blinds, gates, etc. Precise positioning and power monitoring.
Unfortunately, this product has either been discontinued by the manufacturer, or we no longer stock it.
Please contact us for alternatives and assistance.
EAN / Barcode: 5902020528340
Our technical team is on hand to solve any problems or help you find the ideal solution.
The FIBARO Roller Shutter 2 is a remote controlled Z-Wave controller for awnings, blinds, venetian blinds, gates and other AC powered phase devices. The device allows for precise positioning of roller blinds and lamellas, monitor your usage with built in energy and power consumption metering hardware. The controller can be operated via the Z-Wave or manually by using controls on the connected device.
- Compatible with any Z-Wave or Z-Wave+ Controller
- Supports Z-Wave network Security Modes: S0 with AES-128 encryption and S2 Authenticated with PRNG-based encryption
- To be installed with roller blind motors with electronic or mechanical limit switches
- Advanced microprocessor control
- Active power and energy metering functionality
- Works with various types of switches – momentary, toggle and dedicated roller blind switches
- To be installed in wall switch boxes.
- Compatible with the Fibaro Z-Wave range of products
- Compatible with the Z-Wave market of products
Manuals and Guides
Frequently Asked Questions
What is a Roller Shutter module?
Roller Shutter is a roller blind controller compatible with Z-Wave network. Roller Shutter module allows to control and position roller blind motors.
How big load can be connected to Roller Shutter module?v
Roller shutter module can handle up to:
- 4,2 A for lamps and resistive loads
- 1,7 A for motors with compensated power factor (inductive loads)
Can I connect Roller Shutter to my old roller blind controller?
Generally no – Roller Shutter is designed to be connected directly to roller blind motor.
Does your Roller Shutter module can control DC motors?
In fact no. DC motors uses different control technology so it cannot be controlled without additional executive circuit.
Can I control more than one module from my Roller Shutter?
Yes you can – use association functionality and control up to 15 roller shutter modules from only one module.
How many roller blinds can be controlled by association mechanism?
If you use Home Center 2 or Home Center Lite you can associate 15 Roller Shutter modules but it is not recommended to associate more than 10 devices in general.
Can I control and position roller blind of mechanical limit switches?
Yes – these roller blinds are fully compatible with our roller shutter module.
Can I control and position roller blind with electronic limit switches?
You can control such roller blinds but it will not be possible to position them. To control such roller blinds please modify parameter 10 for value 1.
How can I create a scene that will open roller blinds of certain level?
You should use proper block according to your device’s name. For example for A2 roller shutter will be following block:
You can enter desired open level in green box (45% for example). Red box is used for defining delay (10 seconds).
I have connected Roller Shutter module to my roller blind motor, but it moves only a bit and then stops, why?
Probably you have roller blinds with electronic limit switches, please modify parameter 10 value to 1.
Physical and Performance Attributes
|Dimensions (L x W x H)||37 × 42 × 17 mm|
|Operating Temperature||0 - 35°C|
|Max Consumption||to 0.8 W|
|Power Supply||110 - 240 V AC 50 - 60 Hz|