Ring Alarm 5 Piece Security Starter Kit (1st Gen)

Description

Welcome to your safer, smarter home. Ring Alarm easily expands to fit your needs, on your terms. Simply plug in the Ring Base Station, connect your components, get set up with your account in the Ring app and control your Ring Alarm all with the Keypad or from the Ring app. Everything you need to get started is in the box.

Get real-time notifications to your smartphone or tablet when someone enters a room, opens a window or sets off the siren. Built-in motion sensitivity to prevent unnecessary notifications^[3]. Easily change your Alarm modes, sync all your Ring devices to the app and monitor them from one simple dashboard. On your way out but forgot to set your Alarm? Don’t worry. With Ring, you can arm or disarm your Ring Alarm no matter where you are, from the free Ring app.

Your Ring Alarm detects an issue You’ll receive notifications when a contact sensor, motion detector or any part of your Alarm system is triggered.	See what’s happening Check your Ring app to verify whether it’s simply a family member coming home early or something more serious	Add an extra layer with optional Assisted Monitoring Subscribe to a Ring Protect Plus Plan and opt into Assisted Monitoring to receive automated calls when your Ring Alarm detects a security issue.

Real time mobile notifications Receive notifications when any of your Alarm sensors are triggered.	24-hour backup battery [1] Keep your home safe and secure even if the power goes out.	Optional cellular backup [2] Continue monitoring your home in the event that your system goes offline.	Optional Assisted Monitoring [2] Add an extra layer of protection with our optional Assisted Monitoring service.

Box Includes

• 1 x Base Station – Keep your Ring Alarm online and connected to your devices. Connect the Base Station via Ethernet or Wi-Fi. If the power goes down, you’ll still be protected with battery power for up to 24 hours [1]. With Ring Protect Plus[2] you can even benefit from cellular backup if your internet connection drops.
• 1 x Contact Sensor – Secure and stylish. Mount Contact Sensors to doors or window frames so you always know when they open.
• 1 x Motion Detector – Mount Motion Detectors ^[1] to room corners or flat walls and choose to get audio or mobile notifications whenever motion is detected inside your home. Pet-friendly to avoid unnecessary notifications from pets weighing under approximately 22 kgs.
• 1 x Keypad – Control your system from inside your home with battery-powered convenience. Mount the Keypad to any flat wall or simply leave it on a nearby surface for everyday convenience. Add multiple keypads around the house for easier access.
• 1 x Range Extenders – Add Range Extenders ^[1] throughout your home to extend the signal from your Alarm Base Station to all Alarm components, so you can make sure your security coverage stays strong and clear.

Specifications

Base Station

Power
100 – 240V 50/60Hz AC adapter and rechargeable battery Included
Battery life
Rechargeable 24-hour backup battery ^[1]
Operating conditions
0°C to 40°C (32°F to 104°F)
Siren
104 decibels at 30 cm
Connectivity
Ethernet, Wi-Fi, Z-Wave, Zigbee, Bluetooth for setup (plus cellular backup with Ring Protect Plus subscription)
Setup Requirements
Ring Alarm Base Station (sold with Alarm Security Kit)

Keypad

Power
AC adapter, rechargeable battery included
Battery life
Up to 8 months per charge ^[1]
Operating conditions
0°C to 40°C (32°F to 104°F)
Installation
Wall mount with quick-release bracket or place it on any flat surface
Security Modes
“Disarmed” deactivates your sensors and allows you to move freely throughout the house. “Away” activates all your sensors to protect your home while you’re away. “Home” only activates select sensors to give you flexibility.
Connectivity
Z-Wave (76 metre range to Base Station)
Setup requirements
Ring Alarm Base Station (sold with Alarm Security Kit)

Contact Sensor

Power
3V lithium battery included
Battery life
Approximately three years ^[1]
Operating conditions
0°C to 49°C (32°F to 120°F  )
Connectivity
Z-Wave (76 metre range to Base Station)
Installation
Mounts to doors and window frames
Maximum distance between sensors
1.27 cm
Setup requirements
Ring Alarm Base Station (sold with Alarm Security Kit)

Motion Detector

Power
3V lithium battery included
Battery life
Approximately three years ^[1]
Operating conditions
0°C to 49°C (32°F to 120°F)
Connectivity
Z-Wave (76 metre range to Base Station)
Installation
Mounts to room corners or flat walls
Setup requirements
Ring Alarm Base Station (sold with Alarm Security Kit)

Range Extender

Power
AC adapter, rechargeable battery included
Battery life
Rechargeable 24-hour battery backup ^[1]
Operating conditions
0°C to 49°C (32°F to 120°F)
Connectivity
Z-Wave (76 metre range to Base Station)
Installation
Plugs into standard UK power sockets
Setup requirements
Ring Alarm Base Station (sold with Alarm Security Kit)

Compatibility

• iOS
• Android
• Windows 10
• macOS
• Alexa

More Information (coming soon)

1. Actual results may vary based on factors such as usage, location, and the environment.
2. Ring Protect Plus sold separately. For more information on plans and pricing, visit Ring.com/protect-plans.
3. Pet detection: If set at the lowest motion sensitivity setting and mounted at 2.1 metres above ground for pets under 22kg. Find out more.