The Hive ICEMTNSENSOR Motion Sensor lets you know everything’s okay back home so you can take it easy wherever you are.

Unfortunately, this product is temporarily out of stock. We are awaiting information regarding the availability of this product.

Please contact us for alternatives and assistance.

EAN / Barcode: 5054347000907

Compatibility

Hive Motion Sensor is compatible with the following systems:
Zigbee CompatibleHive Hub Compatible

product-page-callout-v2-_support-full-width

Any Questions?

Our technical team is on hand to solve any problems or help you find the ideal solution.

Description

Relax. Our Hive Motion Sensor lets you know everything’s okay back home so you can take it easy wherever you are.

What’s in the Box?

  • Hive Motion Sensor
  • 1 battery CR123A Lithium
  • Adhesive pads
  • User guide

Hardware Features

  • Set up to six notification time slots per day

More Information

Compatibility

System Requirements

  • Internet connection recommended: 1.5Mbps or higher
  • iOS or Android device running an up-to-date operating system

Frequently Asked Questions

Q

Can I have my Hive Motion Sensor installed by an engineer?

A

The Hive motion sensors are self install only.


Q

What are Hive Motion Sensors and how do they work?

A

The Hive Motion Sensor will detect motion in your home and send a notification to your phone through the app. It is possible to check the app or online dashboard to see if motion has been detected and it is also possible to set schedules using Hive Actions so you only receive notifications at certain times of the day such as when you are not home.

If you are an existing user of Hive and have one or more products already, you will not need any further kit and can set up your Hive Motion Sensor using your existing hub. If this is your first Hive product, you will need to purchase a Hive hub in order to set up your Hive Motion Sensor.

 


Q

How do I change the batteries of my Hive Motion Sensor?

A
  1. Slide up the front of the case and remove the used battery
  2. Place a new battery into the motion sensor
  3. Now slide the front of the case back down and your motion sensor is ready to use again

Q

How do I reset my Hive Motion Sensor?

A
  1. Slide the front of the case upwards
  2. Find the small red button, press and old for around 10 seconds – the red light should go on and off
  3. A green light will now flash once
  4. After 5 seconds, you will see a flashing amber light which shows the sensor is in pairing mode
  5. When the light stop flashing, you are done

Q

How do I turn notifications on or off for my Hive Motion Sensor?

A

In order to enable or disable notifications you need to follow these steps:

  1. Tap on the motion sensor you would like to alter
  2. Select the ‘Actions’ tab
  3. Locate the action in this list that triggers notifications and tap the toggle in the corner to able or disable it
  4. If you want to add a notification then tap the ‘+’ to begin

 


Product Specifications

Physical and Performance Attributes

Weight300 grams
Dimensions

Width: 24mm
Height: 84mm
Depth: 24mm
Weight: 62g

Electronics Attributes

Battery TypeCR123A
Number of Batteries1