Aqara Motion and Light Sensor P2
Elevate your smart home with the Aqara Motion and Light Sensor P2 – a cutting-edge device compatible with Matter, Apple HomeKit, Alexa, and more. Seamlessly integrate motion and light sensing, achieving energy efficiency and precise control. Enhance security with local and remote alarms. Experience the future of home automation with Aqara P2.
Our version includes an extra free holder (2 holders in total) for added convenience, providing the same great value with improved usability.
£33.98 inc VAT
Compatibility
Aqara Motion and Light Sensor P2 is compatible with the following systems:
EAN / Barcode: 6970504219656
Description
Aqara Motion and Light Sensor P2
Our flagship motion sensor, now with native Matter support
Explore the Aqara P2, a smart device with both infrared motion and light sensor, using the advanced Thread protocol. Featuring long-lasting dual CR2450 batteries with Aqara’s low-power technology, it ensures prolonged use. Compatible with the Matter ecosystem, the P2 enables diverse and rich automation scenarios, enhancing your smart home experience with precise control over lighting and more.
Aqara Motion and Light Sensor P2 Features:
- Native Matter Support: With the arrival of the Matter era, users no longer need to worry about different ecosystems and technical protocols, and only need a Matter app, Matter-compatible Thread Border Router and Matter Controller. This means that connections across ecosystems and platforms become simpler and easier.
- Independent Light Sensor*: P2 features a built-in light sensor to monitor area illumination levels, with a detection range of 0-1500lux. It can adjust the brightness and temperature of lighting based on different light levels throughout the day.
- High-Precision and Wide Angle**: Explore P2 featuring a Wide Viewing Angle, with a 170° detection angle and up to 7 m (extendable to 10 m with Aqara Home) range using PIR Tech. Includes a 360-degree adjustable stand for precise motion detection in targeted areas.
- Locally Convenient and Energy-Efficient: Saving energy is no longer a hassle or effort. Let P2 effortlessly and swiftly make adjustments and automate tasks. For example, it automatically turns on lights and exhaust fans in the bathroom upon detecting someone, and switches them off when no one is present. No more worries about inadvertently leaving home energy sources on.****
- Local and Remote Alarm***: Place the Aqara Motion & Light Sensor P2 in key locations at home to help detect and monitor anomalies. Receive alerts via app or speaker, and link with other smart products to create a more comprehensive security setup.****
- Easy to Install and Place in Everywhere: The sensor includes 2 adjustable stands for easy wall, ceiling, or horizontal installation, allowing precise P2 positioning for specific area monitoring, like over a desktop. The Motion and Light Sensor P2, powered by a 2*CR2450 Lithium battery, which makes its battery life one of the longest among Matter over Thread sensors.*****
- Exclusive Features of Aqara Home: After connecting the P2 to the Hub M3 and integrating it with the Aqara Home app (iOS/Android), it will gain enhanced functionalities. These include improved automations, customizable detection timeout and sensitivity settings, motion indication, a local alert system, and more.******
* The light sensor functionality may be unavailable with some Matter apps, such as Amazon Alexa.
** The detection angle and the sensitivity may vary depending on the ambient temperature and the distance.
*** Alert/security system function is not available in all the ecosystems (e.g., in Alexa it has a limited availability).
**** The local automation capabilities may vary depending on the Matter ecosystem the product is connected to. For the best possible experience, Aqara Home and Hub M3 are advised.
***** The battery life depends on the particular Matter ecosystem and the number of Matter ecosystems the device is connected to.
****** To connect the sensor to Aqara Home, the Hub M3 is required.
What is Required:
To add the P2 to a particular Matter-enabled app, your device or devices will need to have both functionalities, therefore a 2-in-1 Matter Controller & Thread Border Router is needed as a minimum requirement.
Works with Apple Home
- Apple TV 4K Wi-Fi + Ethernet (2022 version)
- Apple TV 4K (2021 version)
- HomePod (2nd gen)
- HomePod Mini
Works with SmartThings
- Aeotec Smart Home Hub
- SmartThings Hub v3
- SmartThings Hub Dongle
- SmartThings Station
Works with Alexa
- Echo (4th generation)
- Echo Show 8 (3rd Gen)
- Echo Hub
- Echo Show 10 (3rd Gen)
- Echo Studio (2nd Gen)
- Echo Studio (1st Gen)
- Eero Max 7
- Eero Pro 6E, Pro 6, 6 Plus, 6 POE 6, and PoE Gateway
Works with Google Home
- Nest Hub (2nd gen)
- Nest Hub Max
- Google Nest Wi-Fi Pro
Works with Nanoleaf
- Nanoleaf Lines
- Nanoleaf Elements
- Nanoleaf Shapes (Hexagon / Triangles)
Aqara Motion and Light Sensor P2 Automations Examples:
1. Granular light control for more comfort and energy saving
IF Motion is detected at the desktop, WHEN Every day from 18:00 to 23:00 , THEN Turn the desktop light on
Install the P2 in each zone of the room which is lit independently, and the lighting will follow you around the room: the desktop lights will be turned on right when you sit by your desktop, the bar counter strip will light up when you start making the drinks and more.
(Motion Sensor P2 + Hub M3 + Spotlight or LED Strip)
2. Use the Light Sensor for Energy Saving
IF Brightness exceeds 500 lux, WHEN The outdoor temperature is high, THEN Close the curtain
When the sun is too bright, the P2 will be able to help you to automatically close your curtains to prevent the sun from heating the room when it’s not needed and drastically save on cooling bills.
(Motion Sensor P2 + Climate Sensor + Hub M3 + Roller Shade Driver or Curtain Driver)
3. Fully automated light control based on motion and brightness
IF Motion is detected, WHEN Brightness is lower than 100 lux, THEN Set the Ceiling Light to Bright Cold White , THEN Turn on the Ceiling Light
You will be able to schedule different automations based on the brightness in the room to achieve circadian lighting and ambient control: the light will change its color temperature according to the time of the day and turn on or off only when it’s really needed.
(Motion Sensor P2 + Hub M3+ Ceiling Light T1M)
4. Local and Subscription-Free Security with Aqara Home
(Away Alert is Enabled in Aqara Home), IF Motion is detected, THEN Send a Critical Alert notification to smartphone, THEN Camera Hub G3 turns to the area where motion was detected and starts recording
Thanks to the Aqara Home Alert System, you will be able to automatically switch between Away, Home and Night modes, and take benefit from only receiving the relevant notifications and triggering other devices such as cameras for more peace of mind.
(Motion Sensor P2 + Hub M3 + Camera)
Manuals and Guides
Frequently Asked Questions
Where should Aqara Motion and Light Sensor P2 be installed and how to install it?
1. Install in areas where it is necessary to detect whether there are people, such as living rooms and bedrooms (please refer to the Motion Sensor detection distance in the manual when installing);
2. It can be placed on the surface of coffee table, shoe cabinet, desk, etc.,but must be close to the edge (recommended installation height is 1.2m ~ 2.0m);
3. Do not place it on a metal surface, and do not place obstructions in front of the Motion and Light Sensor P2.
What are the precautions for installing Motion and Light Sensor P2?
1. Please do not install it on smooth and moisture-prone surfaces such as ceramic tiles, glass, marble to avoid the adhesive from falling off;
2. Please do not install it on the surface of high-temperature, heating objects such as lighting tubes to prevent the adhesive from falling off;
3. Please do not install it on rough, uneven surfaces such as wall coverings to prevent the adhesive from falling off;
4. Do not face heating objects such as electrical appliances when installing to avoid false triggering caused by infrared interference.
How to reset Aqara Motion and Light Sensor P2?
Press and hold the button of the device for 5 seconds, the indicator light flashes fast, release the button within 3 seconds, the device reset is complete.
What is the reason for the connection failure of Aqara Motion and Light Sensor P2? How should I reconnect?
1. Operation error, please refer to the device adding method again and add the device again;
2. The distance from the hub is too far and the network communication effect is poor. Move the device closer to the hub and then add the device again;
3. The hub device used does not support the Thread protocol. Please choose a hub that supports the Thread protocol according to the official introduction.
Why does the indicator light of Motion and Light Sensor P2 change from blue to red?
Battery is low.
If a pet enters the detection area of the Aqara Motion and Light Sensor P2, will the sensor be triggered?
Yes, if you don’t want to be triggered by pets, you can install the Motion and Light Sensor P2 in a higher place according to the detection range diagram described in the manual, so that the sensor will not be triggered when pets are active on the ground. (Please refer to the manual for specific installation mode).
Why does the device report that someone is passing by when no one is passing by?
1. There are heating objects in the detection area of Motion and Light Sensor P2 that interfere with infrared detection;
2. Motion and Light Sensor P2 detects hot and cold air flowing with a large temperature difference in the detection area.
Under what circumstances will Aqara Motion and Light Sensor P2 often go offline?
Possible reason:
1. The device is far away from the hub and the communication effect is poor. Please move the device closer to the hub;
2. The battery is low or dead,please replace it with a new battery;
3. Equipment mounted on metal surfaces, signal interference.
Aqara Motion and Light Sensor P2 does not respond,but the indicator light flashes normally when the reset button is pressed. What is the reason?
Possible reason:
1. The PIR probe or lens is damaged;
2. At this time, the device is in the trigger interval;
3. The device is offline, please confirm whether the connection between the device and the hub is normal.
How to use the “Detection Time Interval”
“Detection time interval” is to set the shortest trigger time from the previous”someone passing”event to the next”someone passing”event. The motion time interval is 1 minute,that is,after detection someone,it will not be detection again within 1 minute. Someone is moving. The illumination detection interval is 30 seconds.
What ecosystem currently available?
Currently available on Aqara Home, Apple Home, Alexa, Google, Samsung.
Motion and Light Sensor P2 supports joining up to several ecosystem at the same time
Motion and Light Sensor P2 supports up to 5 ecosystem being added at the same time (Apple Home counts as 2 ecosystem).
Videos
Product Specifications
Physical and Performance Attributes | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Weight | 100 grams | ||||||||||||||||||||||||
| Dimensions (L x W x H) | 70 × 41 × 85 mm | ||||||||||||||||||||||||
Misc Product Attributes | |||||||||||||||||||||||||
| |||||||||||||||||||||||||
